What the Reissued Bushman Kit Includes
The reissue of the COMBAT ARMORS MAX20 Soltic H102 Bushman reinforced type brings back a snap-fit model kit (some parts require glue) designed by Kunio Okawara and supervised by Takahiro Yamada. The kit features newly tooled reinforced Zack parts, a movable auxiliary rocket on the lower Zack, and a bonus Federal Army sidecar. Light gray parts like the thighs are molded in a kit-exclusive silver color. The cockpit canopy uses clear brown plastic with pre-painted orange frames. Water-slide decals let you recreate various markings.
Key Features from the Kit
- 【再販】 COMBAT ARMORS MAX20 ソルティック H102 ブッシュマン 強化型ザック装着タイプ: Snap-fit model (some parts require glue). Poly caps at each joint allow free posing. You can assemble most of the kit without glue, and the poly caps give the finished model a wide range of dynamic poses.

【再販】 COMBAT ARMORS MAX20 ソルティック H102 ブッシュマン 強化型ザック装着タイプ - 【再販】 COMBAT ARMORS MAX20 ソルティック H102 ブッシュマン 強化型ザック装着タイプ: Newly tooled reinforced Zack parts. The auxiliary rocket at the bottom of the Zack is movable. The reinforced Zack is the key visual difference from the standard Bushman, and the movable rocket adds a display option.
- 【再販】 COMBAT ARMORS MAX20 ソルティック H102 ブッシュマン 強化型ザック装着タイプ: Bonus Federal Army sidecar included. The sidecar is a bonus part that adds display variety and diorama potential.
- 【再販】 COMBAT ARMORS MAX20 ソルティック H102 ブッシュマン 強化型ザック装着タイプ: The kit can also be assembled as the standard Soltic H102 Bushman. If you prefer the standard look, you have the option to build it without the reinforced Zack parts.
Suggested Assembly Order
The catalog does not specify a step-by-step build sequence, but based on the kit's components, this order helps avoid rework.
- 1. Prepare your workspace: Gather a hobby knife, nippers, and a small amount of plastic cement for the few parts that require glue. Have a bowl of warm water ready for the water-slide decals.
- 2. Build the main body first: Assemble the torso, arms, and legs. The poly caps at each joint allow posing, so test fit the joints before final assembly.
- 3. Add the reinforced Zack parts: Attach the newly tooled reinforced Zack to the back. The auxiliary rocket at the bottom is movable, so position it as you like.
- 4. Attach the cockpit canopy: The clear brown canopy has pre-painted orange frames. Carefully snap it into place to avoid scratching the paint.
- 5. Apply decals: Use the water-slide decals to add markings. Cut each decal close to the design, soak briefly, then slide it onto the model. Seal with a clear coat if desired.
- 6. Build and attach the sidecar: Assemble the bonus Federal Army sidecar and attach it to the model or display it separately.
Posing and Display Tips
Thanks to the poly caps at each joint, the Bushman can hold a wide range of poses. Experiment with the auxiliary rocket angle and the sidecar placement to create dynamic dioramas. The kit-exclusive silver-colored light gray parts give the model a distinct look compared to the standard release. For long-term display, avoid direct sunlight to prevent the clear brown canopy from yellowing.

