1/4 Scale Bunny Figure Storage and Display Guide
By グッドスマイルカンパニー公式ショップ | Published: 2026-10-18
Category: Product Reviews
Learn how to display and store large 1/4 scale bunny figures like カンナ バニーVer. and 水戸郁魅 バニーVer. with practical tips on spacing, lighting, and dust protection.
Quick answer
To display 1/4 scale bunny figures safely, use a shelf at least 40 cm deep, keep them away from direct sunlight, and rotate poses every few months to prevent joint stress.
Why 1/4 scale bunny figures need special care
Figures like カンナ バニーVer. (about 350 mm tall) and 水戸郁魅 バニーVer. (about 415 mm tall) are larger than standard figures, so standard display shelves often lack depth and height. Their bunny suits and fishnet tights also require gentle handling to avoid tearing or discoloration.
Because these figures are heavy (often 1–2 kg), a stable base is critical. Avoid placing them on glass shelves unless the shelf is rated for at least 5 kg. Use a level surface to prevent tipping.
Dust protection without hiding the figure
Bunny figures with exposed skin and fishnet tights attract dust. A glass display case is ideal, but if you use open shelving, a soft makeup brush works better than a cloth for dusting. Avoid compressed air, which can blow dust into joints.
For long-term storage, consider a clear acrylic riser or a dedicated figure case with a dust cover. Never store them in direct sunlight—UV rays can fade the bunny suit and skin tones over time.
How to display and store 1/4 scale bunny figures
- Step 1: Choose the right shelf: Measure your figure's height and depth. For カンナ バニーVer. (350 mm) and 水戸郁魅 バニーVer. (415 mm), use a shelf at least 45 cm tall and 40 cm deep. Avoid shelves with a front lip that blocks the figure's base. Common mistake: Using a shelf that is too shallow, causing the figure to lean forward or fall.
- Step 2: Secure the base: Place the figure on a non-slip mat or use a small adhesive pad under the base. Ensure the base is flat and the figure is centered to prevent tipping. Checkpoint: If the figure wobbles, adjust the base or add a thin shim under one corner.
- Step 3: Position lighting carefully: Use LED strip lights or spotlights aimed from above or the side, not directly in front. Direct light can cause heat buildup and fade colors. Keep lights at least 15 cm away from the figure. Common mistake: Using halogen bulbs, which emit heat and can damage the figure's paint or fishnet tights.
- Step 4: Dust regularly with the right tools: Use a soft, wide makeup brush or a microfiber cloth to gently dust the figure. For fishnet tights, use a dry brush only—never use water or cleaning sprays. Dust every 2–4 weeks. Checkpoint: If dust is stubborn, use a low-power handheld vacuum with a brush attachment on the base only.
- Step 5: Rotate poses and check joints: Every 3–6 months, gently rotate the figure's arms or head (if articulated) to prevent joint stiffness or stress marks. For static figures, simply lift and reposition slightly to avoid permanent leaning. Common mistake: Leaving the figure in the same pose for years, which can cause the material to sag or joints to loosen.
Product facts
- カンナ バニーVer.: カンナ バニーVer. is 1/4 scale, about 350 mm tall, and comes with a custom-colored fishnet tights material. The fishnet tights are delicate—use a soft brush for dusting and avoid pulling or stretching them.
カンナ バニーVer. - 水戸郁魅 バニーVer.: 水戸郁魅 バニーVer. is 1/4 scale, about 415 mm tall, and uses cloth fishnet tights for a realistic texture. The cloth tights can snag easily; handle the figure by the base or torso when moving it.
水戸郁魅 バニーVer.
