Air Shakkar Jacket & Tamamo Cross Riders Jacket: Sizing and Care

Quick answer

Treat both jackets as oversized statement pieces: confirm the fit over the layers you actually wear, spot-clean rather than machine-wash, and store them flat or on a wide hanger away from heat. The Air Shakkar jacket's synthetic leather and all-over grid print need gentler handling than the Tamamo Cross riders jacket's structured design.

Step-by-step sizing and care routine

1. Check the fit over your usual layers: Try the jacket on over the shirt or hoodie you would actually wear with it, and check that the shoulder seam sits where you want it and the sleeves do not swallow your hands. Common mistake: judging the fit over a thin T-shirt only, then finding it restrictive over a hoodie. If you are between sizes and want a closer fit, size down; if you want the intended oversized look, keep your usual size.
2. Spot-clean the Air Shakkar jacket's printed surface: Dab stains with a soft, damp cloth and a small amount of mild soap, working from the outside of the stain inward, then wipe with a clean damp cloth and let it air-dry away from direct heat. Common mistake: scrubbing the grid print, which can abrade the synthetic leather finish. Test any cleaner on an inside hem first and stop if the color lifts.
3. Brush and air the Tamamo Cross riders jacket: Use a soft garment brush or a lint roller to remove dust from the structured details, then hang the jacket in a well-ventilated room for a few hours after wearing. Common mistake: spraying perfume or deodorant directly on the jacket to mask odors, which can leave residue on the design. Air the jacket before storing it, never put it away damp.
4. Store on a wide hanger or folded flat: Hang either jacket on a wide, padded hanger so the shoulders keep their shape, or fold it flat with tissue paper at the creases if shelf space is limited. Keep both away from radiators, direct sunlight and damp walls. Common mistake: cramming the jacket into a full closet, which creases the oversized silhouette and can press the print. Leave a hand's width of space around each hanging jacket.
5. Rotate and inspect every few months: Check stored jackets for dust, creasing or stiffness, and re-air them before wearing again. Common mistake: leaving a jacket in a plastic dry-cleaning bag, which traps moisture. Use a breathable cotton garment bag instead of plastic for long-term storage.

Product facts

• タマモクロスのライダースジャケット: Oversized, unisex fit that recreates Tamamo Cross's race-outfit design. The roomy cut means you can layer underneath, but check the sleeve and shoulder drop before deciding it is too big.

  

• エアシャカールのジャケット: Synthetic leather jacket with an all-over grid print in a unisex oversized design. The printed synthetic surface calls for spot-cleaning and low heat, since rubbing or heat can dull the print.