What the DLX Iron Man Mark 6 (Battle Damaged) Includes
The DLX Iron Man Mark 6 (Battle Damaged) from threezero and Marvel Studios recreates the hero's suit with die-cast parts and metallic paint. The surface features bullet holes and scratch details that give a textured, combat-worn look. The figure comes with a wide set of accessories: a pair of smart micro guns, arm missiles, micro munition missiles, shoulder missiles, laser beam effects, flight effect parts for hands and feet, and six pairs of interchangeable wrist parts (fists, open hands, shooting hands, laser-effect hands, flight-pose hands for effect parts, and shooting-pose hands for effect parts). It also includes a DLX action stand.
Because the paint and die-cast finish are central to its appearance, handling and display choices matter more than with a plain plastic figure. The following advice is based on the supplied catalog information; it does not replace manufacturer instructions.
Catalog Evidence for Display Planning
- DLX Iron Man Mark 6 (Battle Damaged) (DLX アイアンマン・マーク6(バトルダメージ)): The figure uses die-cast parts with metallic paint and applied battle damage textures (bullet holes, scratches). The metallic finish and textured damage are sensitive to abrasive contact. Choosing a display surface and cleaning method that avoids rubbing these details will keep the figure looking as intended.

DLX Iron Man Mark 6 (Battle Damaged) (DLX アイアンマン・マーク6(バトルダメージ)) - DLX Iron Man Mark 6 (Battle Damaged) (DLX アイアンマン・マーク6(バトルダメージ)): The figure includes six pairs of interchangeable wrist parts and multiple weapon accessories (smart micro gun pair, arm missiles, micro munition missiles, shoulder missiles, laser beam effects, flight effect parts). Swapping hands and attaching small effect parts requires careful handling. A well-lit workspace and a soft surface (like a microfiber cloth) reduce the risk of dropping or scratching these small pieces.
- DLX Iron Man Mark 6 (Battle Damaged) (DLX アイアンマン・マーク6(バトルダメージ)): A DLX action stand is included for stable display. Using the stand ensures the figure remains upright without leaning on its die-cast joints or paint. This is especially helpful when posing with the larger missile and effect accessories attached.
Display Setup Steps
Follow these steps to set up your DLX Iron Man Mark 6 (Battle Damaged) for safe display.
- Choose a stable, level shelf: Select a shelf that is not prone to vibration (e.g., away from speakers or foot traffic). The die-cast parts add weight, so ensure the shelf can support it. The included DLX action stand provides extra stability.
- Attach the action stand first: Secure the stand to the figure before adding any accessories. This gives you a stable base to work from and prevents the figure from tipping over during assembly.
- Add accessories one pair at a time: Start with the larger accessories (shoulder missiles, arm missiles) and then move to smaller items (smart micro guns, laser effects). Handle each piece over a soft cloth to avoid drops.
- Position effect parts carefully: The flight effect parts for hands and feet are likely translucent or semi-transparent. Insert them into the designated hand and foot ports gently; do not force them. If resistance is felt, check alignment.
Handling and Cleaning Without Damaging the Paint
The battle-damaged finish is part of the figure's design, but unintended scratches from dust or handling can still degrade its appearance. To clean the figure, use a soft, lint-free microfiber cloth. Lightly dampen the cloth with distilled water if needed—never use alcohol, solvents, or abrasive cleaners, as these can strip the metallic paint or damage the die-cast coating.
When handling the figure, hold it by the torso or the base of the stand rather than by the arms or missile pods. This reduces stress on the joints and prevents accidental detachment of small parts. If you need to swap wrist parts, do so over a soft surface and store unused pieces in a compartmentalized box to avoid loss.
The supplied catalog does not include specific cleaning instructions, so these general precautions are based on the materials (die-cast, metallic paint) and the delicate nature of the battle damage texturing.
What the Catalog Does Not Confirm
The supplied information does not include a recommended age range, certifications, or specific cleaning agents approved by the manufacturer. It also does not specify the exact material of the die-cast parts or the paint type. For detailed care instructions, refer to any documentation that came with the figure or contact the manufacturer directly. The advice here is based on general best practices for handling painted die-cast collectibles.

