Start with what the kit actually gives you
The MODEROID 鐵甲人匕首 & 鐵甲人斧 kit from Mecha Smile brings two Tekkaman adversaries from the anime Tekkaman Blade into model form. The Dagger stands about 160mm tall and the Axe about 140mm, and both have articulated joints. The design is based on drawings by mechanical designer Yoshinori Sayama.
Each figure comes with its own set of interchangeable hands and a Tekk Lancer. The Dagger also includes arrow effect parts for the cosmic crossbow, while the Axe can recreate the Voltekkas firing mode by removing its chest armor. The Dagger offers three face parts: normal, sniping, and a scarred face for battle-damaged looks. Molded colors, pre-painted parts, and stickers let you get close to the on-screen appearance with basic assembly.
Kit contents at a glance
- MODEROID 鐵甲人匕首&鐵甲人斧: Dagger: approx. 160mm tall; Axe: approx. 140mm tall; both have articulated joints. Knowing the size and articulation helps you plan shelf space and posing options before you start building.

MODEROID 鐵甲人匕首&鐵甲人斧 - MODEROID 鐵甲人匕首&鐵甲人斧: Includes interchangeable hands and Tekk Lancer for each figure; Dagger also includes arrow effect parts for the cosmic crossbow. These accessories determine how many display options you have and which parts to keep track of during assembly.
- MODEROID 鐵甲人匕首&鐵甲人斧: Dagger has three face parts: normal, sniping, and scarred; Axe can recreate Voltekkas firing mode by removing chest armor. These features let you switch between different scenes from the anime, so plan your build around the look you want.
Assembly order that keeps options open
- 1. Wash and sort runners: Give the runners a quick rinse and dry to remove mold release agent. Sort parts by figure (Dagger vs. Axe) so you do not mix up the two sets of hands and weapons.
- 2. Build the torso and head first: Assemble the torso and head before attaching limbs. For the Axe, test-fit the chest armor so you can remove it later for Voltekkas mode. For the Dagger, decide which face part to install first—normal, sniping, or scarred—since swapping later may require careful handling.
- 3. Attach limbs and joints: Snap the articulated joints together and check range of motion. Do not force a joint; if it feels tight, gently sand the peg. Keep the Dagger's arrow effect parts and Tekk Lancer within reach for posing.
- 4. Add hands and weapons last: Install the interchangeable hands and Tekk Lancer after the body is complete. Store unused hands in a small bag to avoid loss. For the Dagger, attach the arrow effect to the cosmic crossbow only when you are ready to display that pose.
Seam removal and cleanup without losing detail
Seam lines appear where two halves of a part meet. For visible seams on arms, legs, and weapons, apply a thin layer of plastic cement, press the halves together, and let them cure. Then sand progressively from coarse to fine grit until the seam disappears. Be careful around molded details and pre-painted parts—mask them or sand by hand with a fine grit to avoid removing color.
The kit uses molded colors, so most of the finish comes from the plastic itself. If you plan to paint, do so after seam removal and before final assembly. For small touch-ups, use hobby paints matched to the molded colors. The included stickers can cover small details, but they will not hide seam lines.
Panel lining and finishing touches
Panel lining adds depth to the mechanical details. Use a fine-tip panel line marker or a thinned enamel wash. Apply along recessed lines and wipe away excess with a cotton swab before it dries. Work on one section at a time and let it dry completely.
The Dagger's scarred face part is a focal point—avoid heavy panel lining on the face to keep the scar detail readable. For the Axe, the removable chest armor means you should panel line the inner frame lightly so it looks good in both modes. A matte topcoat can unify the finish and protect the stickers, but test it on a spare part first to ensure it does not react with the plastic.
Posing and display: making the most of the included parts
The Dagger's three face parts let you switch between a calm stance, a sniping pose with the cosmic crossbow and arrow effect, and a battle-damaged look with the scarred face. Use the interchangeable hands to hold the Tekk Lancer or the crossbow. The Axe's Voltekkas firing mode requires removing the chest armor, so display it with the armor off to show that feature.
Both figures have articulated joints, so you can adjust stances for balance. A simple action stand (not included) can help with dynamic poses, but the kit stands fine on its own feet. Keep the figures out of direct sunlight to prevent fading, and dust them regularly with a soft brush.
What the supplied information does not confirm
The catalog does not list specific care instructions, safety warnings, or compatibility with other MODEROID kits. It also does not confirm the exact number of runners, decal sheets, or whether the kit requires glue (though snap-fit is typical for MODEROID). Treat these as unknown until you check the box or official product page. The age range is not stated in the supplied information, so use your judgment for younger builders.

