Nendoroid Multipurpose Pouch: Packing and Care Guide
By グッドスマイルカンパニー公式ショップ | Published: 2026-11-03
Category: How-to Guides
Learn how to pack, carry, and care for your Nendoroid parts in the Multipurpose Pouch, with a simple step-by-step routine that prevents scratches and color transfer.
Quick answer
Use the Nendoroid Multipurpose Pouch to carry spare face plates and small parts, but line it or bag each piece separately, avoid overfilling, and empty it after every trip to prevent color transfer and scratches.
Why the pouch needs a little extra prep
The pouch is designed for portability, not long-term archival storage. Its soft interior can rub against painted parts during movement, and the catalog warns that color transfer may occur if parts are left inside for a long period. That warning is the key to using it well: treat the pouch as a short-term carrier, not a permanent home.
Also check compatibility. The catalog notes the pouch may not be compatible with certain Nendoroids, so test-fit larger or unusually shaped parts before relying on it for a full set.
What to pack and what to leave at home
Pack only the parts you need for the day: a couple of face plates, optional hand parts, and small accessories. Leave fragile or heavily painted pieces in a rigid case at home. The pouch protects against light bumps, not crushing or pressure.
Avoid mixing loose parts directly. Small parts can scratch each other, and tiny pieces can slip into seams. Use small zip bags or soft cloth wraps as a barrier.
Step-by-step packing and care routine
- Empty and inspect before packing: Shake out the pouch and check the interior for grit, dust, or leftover parts. A quick wipe with a dry cloth removes abrasive particles. Never pack parts into a pouch that has not been checked for debris.
- Bag each part separately: Place each face plate or accessory in its own small zip bag or soft cloth wrap before putting it in the pouch. This creates a barrier against rubbing and color transfer. Grouping loose parts together is the most common cause of scratches.
- Load gently and avoid overfilling: Arrange bagged parts so the pouch closes without pressure. Do not force the zipper or stretch the fabric; compression can bend thin parts. If the pouch feels tight, remove a part rather than forcing it shut.
- Carry it flat and secure: Keep the pouch in a bag pocket where it will not be crushed by heavier items. Avoid swinging it by a strap if the pouch has one, as sudden movement shifts the contents. A rigid outer bag protects the pouch from pressure and impacts.
- Unpack and air out after each trip: Remove all parts as soon as you return. Turn the pouch inside out if possible and let it air dry away from direct sunlight before storing it empty. Leaving parts inside for long periods is exactly when color transfer is most likely.
- Clean the pouch with a dry method: Brush out dust with a soft cloth or vacuum crevice tool on low suction. Do not machine wash or soak the pouch unless the care label explicitly allows it. Check the label first; when in doubt, spot-clean only.
Product facts
- Nendoroid Multipurpose Pouch: A multipurpose pouch designed to carry interchangeable parts around with you. It is a travel carrier for parts, so pack only what you need for the outing rather than storing your whole collection inside.
Nendoroid Multipurpose Pouch
