PLAMATEA Muse Body Assembly Guide
By グッドスマイルカンパニー公式ショップ | Published: 2026-10-20
Category: Product Reviews
Learn how to build the PLAMATEA Muse Body: Ichika model kit with our step-by-step guide, including tips for customizing face plates and posing.
Quick Answer
Start by organizing the parts, then assemble the torso and limbs, and finish with the face plates and decals. This guide walks you through the PLAMATEA Muse Body assembly process with common mistakes to avoid.
Why the PLAMATEA Muse Body is a Great Kit for Beginners
The PLAMATEA Muse Body: Ichika is designed for simple and fuss-free assembly, making it an excellent choice for both new and experienced modelers. The kit includes approximately 70 parts, and the joints are fully articulated, allowing for a wide range of poses once assembled.
One of the standout features is the pre-painted smiling face plate, which saves you time and effort. You also get two additional face plates (smiling and neutral) that you can customize with eye decals, giving you the freedom to create a unique expression.
What You Need Before You Start
Before you begin, make sure you have a clean, well-lit workspace. You'll need a pair of plastic model nippers to remove parts from the runners, and a hobby knife or sanding tool to clean up nubs. A cutting mat is also helpful to protect your work surface.
While the kit is designed to be assembled without glue, some parts may require a bit of force to snap together. Patience is key—take your time to ensure each part fits correctly.
Step-by-Step Assembly Guide
- Organize and Prep Your Parts: Lay out all runners and identify the parts you need for the torso, arms, legs, and head. Use nippers to cut parts from the runners, leaving a small nub, then trim it flush with a hobby knife. Check that you have all parts before starting; missing parts can be reordered from the store.
- Assemble the Torso and Core: Start with the torso, attaching the chest, back, and hip joints. Ensure the joints click into place securely, but don't force them—if they don't fit, check for leftover nubs. Test the torso's range of motion before moving on; it should bend and twist smoothly.
- Build the Arms and Legs: Assemble each arm and leg, attaching the shoulder, elbow, and knee joints. Pay attention to the orientation of the joints to avoid reversed limbs. Compare both arms and legs to ensure they are symmetrical before attaching them to the torso.
- Attach Limbs and Head: Connect the arms and legs to the torso, then attach the head with the pre-painted face plate. Make sure all joints are snug but not over-tightened, which can cause stress marks. Gently test all joints after assembly; if any are loose, you can apply a small amount of hobby glue to tighten them.
- Customize Face Plates with Decals: If you want a different expression, use the included eye decals to customize the blank face plates. Apply decals carefully with tweezers, then seal with a topcoat if desired. Practice on the spare face plate first to get the decal placement right.
- Final Posing and Display: Once fully assembled, pose your figure and display it. The fully articulated joints allow for a variety of action poses, but avoid extreme bends that could stress the joints. Use a display stand if you want to keep a dynamic pose stable over time.
Product Facts
- PLAMATEA Muse Body: Ichika C Type: The PLAMATEA Muse Body: Ichika C Type stands at approximately 145mm in height and features fully articulated joints. This size and articulation make it ideal for dynamic posing and display alongside other figures.
PLAMATEA Muse Body: Ichika C Type
