What to Expect from the PLAMAX Raideen Kit
The PLAMAX Raideen plastic model kit brings a classic 1990s magazine feature to life. Based on the 48th installment of Hayami Hitoshi's Super 3D SHOW series, this kit recreates the super robot Raideen with a refined digital scan, adjusted edges, and slightly enlarged proportions. The result is a display piece that captures the dynamic feel of the original artwork.
Before you start, note that this kit requires plastic model tools and adhesive. Painting is optional but will require plastic model paints. The supplied catalog does not specify a recommended age or skill level, so plan accordingly.
Assembly Steps for a Clean Build
Follow these general steps based on typical plastic model kit assembly. The exact order may vary depending on the runner layout.
- Prepare Your Workspace and Tools: Gather side cutters, a hobby knife, sanding sticks or files, plastic cement or instant glue, and tweezers. A cutting mat helps protect your surface. The catalog confirms you need plastic model tools and adhesive.
- Read the Instructions Thoroughly: Review the entire manual before cutting any parts. Identify the runners and check for any small or fragile pieces that need extra care.
- Cut Parts from Runners: Use side cutters to remove each part, leaving a small nub. Trim the nub flush with a hobby knife and sand smooth if needed. Work one section at a time to avoid losing small parts.
- Dry Fit Before Gluing: Test fit each subassembly without adhesive first. This helps you check alignment and see if any seams need sanding. Adjust fit before applying glue.
- Glue and Hold: Apply a thin layer of plastic cement to the mating surfaces. Press and hold for a few seconds. Let the bond cure fully before handling the next section.
- Finish and Paint (Optional): If painting, apply primer after assembly is complete. Use plastic model paints for best adhesion. The catalog notes that painting requires plastic model paints, but does not specify a particular brand or method.
Key Product Details
- PLAMAX ライディーン: The PLAMAX Raideen kit is based on a 1990s magazine feature (Super 3D SHOW #48) and has been digitally scanned, edge-adjusted, and slightly enlarged for this release. This background explains the kit's stylized proportions and the high level of detail, which require careful assembly and finishing to do justice to the original design.

PLAMAX ライディーン - PLAMAX ライディーン: The kit requires plastic model tools and adhesive; painting requires plastic model paints. You need to source these separately. The catalog does not include them, so plan your purchase accordingly.
Tips for a Smooth Build
Because the kit is a digital recreation of a hand-sculpted design, some parts may have subtle parting lines or mold flash. Inspect each piece before gluing and clean up any excess plastic with sandpaper or a file.
The enlarged proportions mean larger surface areas for painting. If you plan to paint, consider using a primer to help the color adhere evenly. The catalog does not specify a primer type, so choose one compatible with plastic model paints.
Take your time with the head and torso sections, as these often have the most visible detail. Dry fitting is especially helpful here to ensure a tight fit without visible glue lines.

