1/4 Scale Bunny Figure Display: Space, Stability and Care
By グッドスマイルカンパニー公式ショップ | Published: 2026-11-02
Category: Tips & Care
Learn how to display and care for a 1/4 scale bunny figure. Plan shelf space, secure the base, and dust safely to keep your large figure looking sharp.
Quick answer
Display your 1/4 scale bunny figure on a sturdy shelf with at least 5 cm of clearance on all sides and 10 cm above, secure the base against accidental bumps, and dust monthly with a soft brush to avoid paint damage.
Why 1/4 scale figures demand more planning
A 1/4 scale bunny figure is significantly larger and heavier than smaller scales, so standard bookshelves may not provide enough depth or weight capacity. The wide stance and dynamic poses common in bunny figures also increase the footprint, meaning you need to measure both the base and the widest point of the figure before choosing a display spot.
Material and environmental trade-offs
Most 1/4 scale figures are made of PVC and ABS, which can be sensitive to heat and direct sunlight. Placing the figure near a window or heating vent may cause gradual warping or fading over time. A stable indoor location with indirect light and consistent temperature is safer, even if it means the figure is less visible.
Step-by-step display and care routine
- Measure the figure and plan shelf space: Use a tape measure to record the figure's total height, base width, and deepest point (often the hair or pose). Add at least 5 cm on each side and 10 cm above to allow for safe handling and airflow. Check that your shelf depth exceeds the figure's deepest point by at least 5 cm to prevent tipping.
- Choose a stable, enclosed location: Place the figure on a solid shelf or cabinet that is not exposed to direct sunlight, heat sources, or high foot traffic. Avoid top shelves where the figure could fall during cleaning or bumps. If the shelf is glass, confirm it is tempered and rated for the figure's weight; when in doubt, add a thin non-slip mat.
- Secure the base and check balance: Attach the figure to its base according to the instructions, then gently rock it to test stability. If the base feels loose, use a small piece of museum putty (acid-free) under the base to improve grip without damaging surfaces. Never force a peg or stand; if it doesn't fit easily, re-check the orientation before applying pressure.
- Dust monthly with gentle tools: Use a soft, clean makeup brush or a camera lens blower to remove dust from crevices. For stubborn dust, lightly dampen a microfiber cloth with distilled water and dab—never rub—painted areas. Avoid compressed air near seams or joints, as it can force dust inside and may damage delicate parts.
- Handle with clean hands and minimal contact: Before touching the figure, wash and dry your hands to avoid oils transferring to the paint. Support the figure by its heaviest solid parts (base or legs), not by thin accessories like bunny ears or twin tails. Keep the original box and blister packaging for safe storage or transport; it is the best protection against breakage.
Product facts to consider
- トール バニーVer.: Total height is approximately 450 mm. This height requires a shelf with at least 50 cm of vertical clearance, plus extra space for the base and any hair or accessories.
トール バニーVer.
